*This post contains affiliate links. That means that if you make a purchase after clicking on a link I may earn a small commission at no extra cost to you. "As an Amazon Associate, I earn from qualifying purchases.” Click here for more Info.

Dodge Ram 1500 Service 4Wd Light Reset

Dodge Ram 1500 Service 4Wd Light Reset

Having trouble resetting your Dodge Ram 1500 Service 4Wd Light? Don’t worry, it’s not as complicated of a task as you might think. All you need to do is turn the ignition key to “On” without starting the engine and press the gas pedal three times within 10 seconds.

To reset the service 4WD light on a Dodge Ram 1500, first, turn off the ignition and disconnect the negative cable from the battery. Wait for two minutes before reconnecting the negative cable to allow all electronics to reset. Then start your engine and let it idle for about 15 minutes in order to recharge any drained batteries.

After that, turn off your engine and press down on both brake pedals at once for about five seconds. This will trigger an electronic scan of all components related to four-wheel drive operation, which should clear out any codes stored in memory and reset your service 4WD light indicator.

Once that’s done, your light should be reset and you can get back on the road!

Dodge Ram 1500 Service 4Wd Light Reset

2014 Ram 4Wd Service Light Reset

If you own a 2014 Ram 4WD, you may have noticed the service light turning on. This is an indicator that it’s time for regular maintenance and repairs. Fortunately, resetting this service light is easy to do yourself; all you need to do is turn off your vehicle, disconnect the negative battery cable, wait 15 minutes, and then reconnect it.

Once this process has been completed, the service light should be reset and ready to go!

How to Clear Service 4Wd Light Ram 2500

If you are experiencing a Service 4WD light on your Ram 2500, the best way to clear it is by resetting the system. To do this, first, begin by turning off the engine and disconnecting the negative battery cable for 10 minutes or more. Once reconnected, start up your vehicle.

If you still see the Service 4WD light illuminated, there may be an issue that needs to be addressed right away with a qualified technician at your local dealership or service center.

How to Clear Service 4Wd Light Ram 3500

If your Ram 3500 is displaying a Service 4WD Light, it’s important to take action as soon as possible. To clear the light and reset the system, you’ll need to disconnect the negative battery cable for 30 seconds. Once reconnected, turn on the ignition switch without starting the engine and allow all warning lights to illuminate on their own.

The Service 4WD Light should be gone after this procedure; if it isn’t, or if it returns again in the future, then further investigation may be needed.

How to Clear Service 4Wd Light Ram 3500

Read More About Dodge Ram Gear Selector On Steering Wheel

What Does Serv 4Wd Mean on Dodge Ram

Serv 4WD on Dodge Ram vehicles is an acronym for Service Four Wheel Drive, which is a feature that allows the driver to switch between two and four-wheel drive modes.

This feature can be activated manually with a switch in the cab or by pressing a button on the dash. Serv 4WD helps provide increased traction in difficult driving conditions such as snow, mud, ice, and sand.

It also makes it easier to navigate steep inclines and declines without having to engage four-wheel drive manually every time you encounter them.

How to Reset Service 4Wd Light Dodge

If your Service 4WD light has come on in your Dodge, don’t worry – you can reset it yourself by following a few simple steps.

First, turn the ignition off and remove the negative battery cable from the battery for at least five minutes. After that, put the negative battery cable back on and turn your vehicle to “On” mode without starting it up.

Finally, press your accelerator pedal all the way down three times within 10 seconds and then release it completely. Your Service 4WD light should now be reset!

2019 Ram 1500 Service 4Wd Light

The 2019 Ram 1500 is equipped with a Service 4WD light, which indicates when the four-wheel drive system in the vehicle needs to be serviced or repaired.

This warning light will typically illuminate when there are problems with the transfer case, differential, or other components of the 4WD system. If this light comes on while driving, it is important to have your vehicle inspected by an experienced mechanic as soon as possible for proper diagnosis and repair.

2019 Ram 1500 Service 4Wd Light

2020 Ram 1500 Service 4Wd Light

The 2020 Ram 1500 is equipped with a Service 4WD Light that helps drivers stay informed about any issues related to the truck’s four-wheel drive system. When this light illuminates, it indicates that there may be an issue somewhere in the four-wheel drive system and service should be sought as soon as possible in order to avoid further complications.

This light can also indicate when the transfer case fluid needs to be changed or if the 4WD switch has been left on while driving in 2WD mode, both of which can cause significant damage if not addressed promptly.

2015 Ram 1500 Service 4Wd System

The 2015 Ram 1500 is equipped with a service 4WD system, which allows drivers to easily switch between two-wheel drive and four-wheel drive.

The system includes an advanced four-wheel-drive module that automatically monitors wheel speed sensors and can activate the front wheels when needed for improved traction in slippery conditions. This feature helps ensure you have maximum control of your truck’s performance while on the road or off-road.

How Do You Reset the Service Light on a Dodge 4Wd?

Resetting the service light on a Dodge 4WD is an easy and straightforward process. The first step is to turn off the engine and remove the negative battery cable from its terminal.

Then you will need to open the hood of your Dodge 4WD, locate and unscrew the plastic cap covering the oil dipstick tube, insert a flathead screwdriver into one end of it, and push it in until it clicks.

This will reset your service light. After that, simply replace the dipped stick tube cover with a new one before reattaching your negative battery cable to its terminal again and turning on your engine.

What Does It Mean When Serv 4Wd Light Comes On?

When the SERV 4WD light comes on, it indicates that there is an issue with your vehicle’s four-wheel drive system. The “SERV” stands for service, and this warning light alerts you to a potential problem in the transfer case or other related parts of the four-wheel drive system.

It can be caused by a variety of issues such as low fluid levels, broken actuators or sensors, worn-out seals and solenoids, etc.

If this light appears on your dashboard it is important to take your vehicle to a qualified mechanic as soon as possible so they can diagnose and repair any problems before further damage occurs.

What Does Svc 4Wd Mean Dodge Ram?

The Dodge Ram is a full-size pickup truck designed and produced by the American automaker, Dodge. The SVC 4WD system stands for Selectable Variable Control Four Wheel Drive, which was introduced on certain models of the second generation (1994–2001) of the Dodge Ram.

This system works with a transfer case that allows you to choose between four different driving modes based on your needs – two-wheel drive, part-time four-wheel drive (4H), full-time variable control four-wheel drive (4V), and low-range variable control four-wheel drive (LOW).

In two-wheel drive mode, only the rear wheels are driven while in part-time 4H mode, both front and rear axles are locked together providing power to all four wheels.

The other two modes involve varying degrees of the torque split between the front and rear axles with LOW providing maximum traction for difficult terrain or slippery conditions.

What Does Svc 4Wd Mean Dodge Ram

Read Also Dodge Ram Lightning Bolt Symbol Won’t Start

What is 4Wd Lock Ram 1500?

The 4WD Lock feature on the Ram 1500 is a great asset for those who frequently drive off-road. It engages both front and rear wheels, giving you maximum traction in low-traction conditions such as mud or snow. When engaged, it can be used to help you ascend steep inclines or traverse through difficult terrain with ease.

The 4WD Lock gives your vehicle extra grip when road surfaces are slippery due to rain, ice, or snow and keeps your tires from slipping on even the most treacherous surfaces.

With this feature enabled, you can feel more confident when driving in these types of conditions knowing that your vehicle’s four-wheel drive capabilities have been maximized for optimum safety and performance.

Max 4wd performance ram 1500 disable stability control

Conclusion

In conclusion, resetting the 4WD Service Light on a Dodge Ram 1500 is an easy process that requires minimal tools. It’s important to ensure that your Dodge truck remains in good condition by completing this task regularly and by having any warning lights checked out as soon as they appear.

If you follow the instructions outlined in this blog post, you will easily be able to reset the service light on your Dodge Ram 1500 quickly and effectively.

Similar Posts