*This post contains affiliate links. That means that if you make a purchase after clicking on a link I may earn a small commission at no extra cost to you. "As an Amazon Associate, I earn from qualifying purchases.” Click here for more Info.

Dodge Ram Gear Selector On Steering Wheel

Dodge Ram Gear Selector On Steering Wheel

The Dodge Ram Gear Selector on the steering wheel is a special feature that allows drivers to shift gears without taking their hands off the wheel. This feature is especially helpful for those who drive in areas with frequent traffic or have limited mobility. The gear selector consists of four buttons located just behind the steering wheel.

Each button corresponds to a specific gear, including Park, Neutral, Reverse, and Drive. Pressing one of these buttons will illuminate green and an indicator light will appear in the instrument cluster to let you know which gear has been selected. 

With this unique design element, Dodge Ram owners can enjoy more convenient and safer driving experiences by keeping their eyes firmly on the road ahead instead of having to look down at their shifter knob while switching gears.

The Dodge Ram’s new gear selector, located on the steering wheel, offers a unique and convenient way to select your desired driving mode.

With just a simple press of the button, you can switch between Park, Reverse, Neutral, and Drive without ever having to take your hands off the wheel. This eliminates unnecessary fidgeting with clunky gear shifters and allows for greater focus on the road ahead.

Dodge Ram Gear Selector On Steering Wheel

Dodge Ram Gear Selector + – Not Working

The Dodge Ram Gear Selector + – Not Working is an issue that has been reported by many owners of the vehicle. If you experience this problem, it is likely due to a faulty shift cable or gear selector switch. It can also be caused by a defective transmission solenoid or wiring circuit.

To resolve the issue, you should take your car to a qualified auto repair shop and have them inspect the components for any faults. By doing so, they will be able to determine what needs to be repaired in order for your Dodge Ram Gear Selector + – Not Working problem to be fixed.

When to Use Gear Limit Ram 1500

When considering towing, the Gear Limit Ram 1500 is an excellent option. It offers a maximum towing capacity of 10,620 pounds and has a variety of features that make it easy and safe to tow your cargo.

The Gear Limit system also helps you stay within your vehicle’s limits by limiting the torque output when accelerating or climbing steep grades to not overwhelm the engine.

With its heavy-duty suspension and four-wheel drive capabilities, it’s no wonder why many people choose this truck for their hauling needs!

When to Use Gear Limit Ram 1500

Read More About Dodge Ram Lightning Bolt Symbol Won’t Start

2020 Ram 1500 Gear Selector

The 2020 Ram 1500’s gear selector is an innovative feature that provides drivers with improved efficiency and convenience. It replaces the traditional shifter with a rotary dial system, which allows for smooth shifting between gears without taking your hands off the wheel.

Additionally, the gear selector has been designed to be intuitive and easy to use, making it ideal for drivers who are looking for a convenient way to switch between gears quickly and easily.

Ram 1500 Gear Shifter

The Ram 1500 Gear Shifter is a heavy-duty gear selector that is designed to handle the toughest conditions.

It features an easy-to-use lever design with rubberized side grips for added comfort and control. The durable construction ensures long-lasting performance, so you can shift gears quickly and reliably in any terrain.

With its innovative design and reliable performance, the Ram 1500 Gear Shifter is perfect for anyone looking to upgrade their driving experience.

How to Use Gear Limit on 2020 Ram 1500

The 2020 Ram 1500 has a feature called Gear Limit, which helps to protect your engine from damage caused by over-revving. To use this feature, you’ll need to first select the highest gear that you want your engine to be limited to.

Once selected, the system will automatically limit the maximum RPM of the engine and prevent it from going into any higher gears when driving at high speeds or on steep inclines.

This can help enhance fuel economy and reduce wear and tear on your vehicle’s transmission, making for a smoother and more efficient ride overall.

2019 Ram 1500 Gear Selector

The 2019 Ram 1500 comes with an all-new gear selector, featuring a rotary e-shift dial that replaces the traditional shifter.

This new design provides easier access and more accurate shifting, offering improved driving performance and fuel efficiency. The gear selector also features an intuitive interface that allows drivers to select the right gear for their needs quickly.

With this updated system, drivers can enjoy smoother shifts and better control over their drivetrain.

2019 Ram 1500 Gear Selector

Read More About Dodge Ram Immobilizer Bypass

How to Change Gears on Dodge Ram 1500

Changing the gears on a Dodge Ram 1500 is relatively straightforward and easy to do. To shift into a lower gear, simply press the clutch all the way down with your left foot and move the shifter from its current position to a lower gear.

To shift into higher gear, press down lightly on the accelerator pedal while pressing down on the clutch with your left foot and moving up to a higher gear.

Once you have shifted into either of these positions, release both pedals at once for an efficient transition between gears.

2019 Ram 1500 Gear Limit Button

The 2019 Ram 1500 is equipped with a Gear Limit Button, which allows users to limit the number of gears available while driving.

This feature prevents drivers from shifting into higher or lower gears than necessary and helps maintain fuel economy. The Gear Limit Button can be adjusted manually by pressing the button on the dashboard or via the Uconnect infotainment system.

What are the Plus And Minus on Gear Shift Dodge Ram?

The plus side of the gear shift on a Dodge Ram is that it offers an efficient and reliable way to change gears. It provides smooth shifting and precise control, making it easy to operate while driving. Additionally, it is durable and can withstand frequent use over time.

The downside of the gear shift on a Dodge Ram is that its design may be unfamiliar or confusing for some drivers because of its unique lever-style shifter system. This could potentially lead to confusion when trying to switch between gears quickly in stressful situations.

What is Adaptive Steering on Ram Trucks?

Adaptive steering on Ram trucks is an advanced technology that assists in providing a smoother and easier driving experience.

This system uses a motor-driven mechanism to electronically adjust the ratio of the steering wheel’s rotation to the vehicle’s turning radius, allowing drivers to make tight turns with minimal effort.

Adaptive steering also provides enhanced responsiveness, making it easier for drivers to maneuver their vehicles around obstacles or quickly respond to emergency situations.

The system can be tailored according to individual preferences, so Ram truck owners are able to customize their driving experience for maximum comfort and control.

How to Change Gears in Dodge Ram?

Changing gears in a Dodge Ram is relatively straightforward. To begin, make sure the truck is in the park and that you have your foot on the brake pedal. Next, press down on the clutch pedal with your left foot until it reaches its resistance point.

Then move the gear shifter into neutral (N) and release the clutch slowly until it’s fully engaged. Finally, select either reverse (R) or drive (D), ensuring to press down firmly before releasing the clutch again and allowing for smooth acceleration when engaging a higher gear.

It’s important to keep an eye out for any jerky motions from the transmission as this could be indicative of a problem with your vehicle’s shifting system or another mechanical issue such as low transmission fluid levels or worn-out parts needing repair or replacement.

How to Change Gears in Dodge Ram

Read Also Dodge Ram Tail Light Wire Color Codes

2 Ram Steering Gear Working Principle

The steering gear is a mechanical device that converts the rotational movement of the steering wheel into linear motion. This motion is then used to turn the wheels of a vehicle and steer it in different directions.

The principle behind this process involves two rams: an inner ram and an outer ram. The inner ram is connected to the steering wheel, while the outer ram connects to both front wheels via tie rods or linkages. 

How Does Ram Type Steering Gear System Works?

Ram-type steering gear system works by using a motor-driven ram to push or pull a piston that is connected to the steering linkage of an automobile. The ram is attached to the vehicle frame and uses hydraulic fluid pressure generated by an electric pump.

When the driver turns the steering wheel, it causes a rotational motion which is transferred via gearing into linear motion that moves the piston, consequently moving two arms on either side of the vehicle’s suspension, thus pushing or pulling one side in order for it to turn around its vertical axis.

This allows for more precise control over turning, particularly at low speeds where other types of systems may not be as effective.

How Does a Steering Gear Operate?

The steering gear is an important component in any car. It is responsible for turning the front wheels of the vehicle when you turn the steering wheel.

The steering gear operates through a series of linkages and gears that convert rotational motion from the steering wheel into linear motion to move the tie rod or rack along its axis, changing the direction of the wheels.

This action can be either manual or power-assisted depending on whether it’s a standard mechanical system or one with hydraulic fluid and electric motors respectively. In each case, differentials are used to transfer forces between two output shafts, allowing smooth operation even at high speeds.

What are the Two Types of Steering Gear Systems?

The two main types of steering gear systems are rack and pinion and the recirculating ball. The rack-and-pinion system is the most common type used in modern vehicles, which uses a toothed metal bar (the rack) that is connected to the wheels via tie rods, as well as a circular gear with teeth (the pinion) attached to the steering wheel.

This system allows for precise control of turning direction by moving the wheel back and forth.

Recirculating ball steering works similarly but instead of using a metal bar, it utilizes an inner shaft containing balls that move against grooves cut into an outer sleeve when the wheel is turned, creating resistance that helps turn the car more easily.

Both types can be adjusted for different levels of power assist depending on driver preference, making them both popular options in today’s cars.

What are the 3 Main Parts of a Steering Gear System?

The steering gear system is one of the most essential parts of any vehicle, as it helps to control the direction and speed at which a car or other vehicle moves.

The three main parts of this system are the steering wheel, the tie rods and ball joints, and the power steering pump. The steering wheel allows for easy maneuvering by providing leverage to turn it in different directions.

Tie rods provide strength and stability while connecting both front wheels together. Ball joints allow for greater flexibility in turning by allowing movement between two separate moving surfaces.

Finally, power steering pumps help reduce the effort needed to operate the system by controlling hydraulic pressure within its components.

What are the 3 Main Parts of a Steering Gear System

Ram Type Steering Gear

The ram-type steering gear is a type of power-assisted rack and pinion steering system that uses hydraulic fluid to provide additional force when turning the wheel. This type of system provides better control and feedback than traditional systems, as well as improved maneuverability and tighter cornering ability.

It’s also more efficient, using less energy while providing greater assistance at lower vehicle speeds than other types of steering systems.

The ram-type steering gear is typically found on larger vehicles like trucks, SUVs, and vans where increased maneuverability is important.

What is Dodge Ers?

Dodgeball is a popular game that has been around for centuries. It involves two teams, usually of equal size and strength, throwing balls at each other to get their opponents out by hitting them with the ball or catching it before it hits the ground. The goal of the game is to have one team remain standing while eliminating all members from the opposing team.

Dodgeball can be played indoors or outdoors on any flat surface, making it easy to find places to play this classic competitive sport.

Steering Wheel Buttons Description for Dodge Ram 1500 II ( 2019 – now ) – Steering Wheel Functions


In conclusion, the Dodge Ram Gear Selector on Steering Wheel is a convenient and intuitive feature that makes driving easier and more comfortable.

It allows drivers to switch gears with just one hand, eliminating the need for a traditional shifter. The gear selector also features an LED display so drivers can always be sure of what gear they are in.

This modern convenience provides both safety and comfort for Dodge Ram owners.

Similar Posts