*This post contains affiliate links. That means that if you make a purchase after clicking on a link I may earn a small commission at no extra cost to you. "As an Amazon Associate, I earn from qualifying purchases.” Click here for more Info.

Subaru Fuel Lines Diagrams

Subaru Fuel Lines

A Subaru fuel line diagram is a schematic representation of the entire fuel system. It includes all parts of the vehicle from the gas tank to the engine and back to the exhaust, showing how each component connects and interacts with one another. The diagram typically shows diagrams for both gasoline-powered vehicles as well as diesel-powered ones.

Subaru Fuel Lines Diagrams

It highlights all components such as fuel lines, filters, injectors, pumps, sensors, tanks and regulators needed for a successful operation. Additionally, it may also include an exploded view so that technicians can get an idea of how pieces fit together in order to make repairs or adjustments if necessary.

subaru legacy fuel line diagram

Subaru Fuel Line Replacement

Replacing the fuel lines in your Subaru is an important maintenance task that should be done periodically to ensure the safe and efficient operation of your vehicle. Fuel line replacement can be a tricky job, as it requires special tools, knowledge of the automotive system, and a good understanding of safety procedures.

The process involves draining the fuel tank and then carefully removing existing hoses and fittings before installing new ones. It’s essential to use OEM parts for this repair; otherwise, you may be at risk for leaks or other complications down the road.

Subaru Fuel Line Size

Subaru fuel lines are typically made from rubber and come in a range of sizes, with the most common size being 5/16”. This is the standard size for most Subaru models and will fit properly into your vehicle’s fuel system. 

Which Fuel Line is the Return Line?

The return line is the fuel line that runs from the engine back to the fuel tank. It carries unused, excess fuel from the engine back to the tank for storage and reuse. The return line also helps maintain pressure in the system by preventing air bubbles or vapor locks in other lines.

To prevent excessive amounts of fuel from being sent through this line, a check valve is fitted at its end which only allows a one-way flow of liquid into it. Thus, ensuring that only a minimum amount of fuel returns while most go out to power your vehicle’s engine as required.

Subaru Forester Fuel Lines Diagrams

Read More about Subaru Wiring Harness Diagram

What are the 3 Hoses on a Fuel Pump?

The three hoses on a fuel pump are the suction hose, pressure hose, and return line. The suction hose is responsible for drawing in gasoline from the tank and sending it to the fuel pump. The pressure line then sends that gasoline under pressure to the engine.

Finally, the return line helps provide any excess or unused fuel back into the tank so that it can be reused again at a later time. All of these hoses play an important role in ensuring your vehicle runs smoothly and efficiently.

What Size Fuel Line Does Subaru Use?

Subaru vehicles generally use 3/8 inch fuel line tubing to provide the engine with gasoline. This size of fuel line is often found in both older and newer Subaru models, as it offers a good balance between flow rate, pressure, cost, and durability.

The larger 5/16 inch size may also be used on some models that require higher flow rates, though this is not as common. The lines are made of high-grade rubber and feature an inner diameter (ID) of 0.315 inches and an outer diameter (OD) of 0.531 inches.

Additionally, it’s important to note that most Subaru cars will have different sizes of fuel lines depending on their model year and engine configuration – so always double-check your vehicle specifications before buying new fuel lines for your car!

What are the Types of Fuel Line Connections?

There are two main types of fuel line connections; compression fittings and flare fittings. Compression fittings have a nut that tightens onto the tubing to create a leak-free connection, while flare fittings use a cone-shaped fitting that is flared outward to make the seal.

Both types of connections require tools such as wrenches or adjustable pliers for installation – usually with some form of thread sealant like Teflon tape added for extra protection against leaks.

Read Also Subaru Engine Swap Compatibility Chart

Subaru Fuel Smell Fix DIY


In conclusion, Subaru fuel line diagrams are an incredibly useful tool for anyone who owns or works on a Subaru vehicle. Having access to these diagrams can save time and money by helping individuals identify the correct parts needed to complete repairs or maintenance.

They also provide a detailed overview of how the system works so that owners and technicians alike can better understand its function.

Ultimately, having access to accurate fuel line diagrams is essential when maintaining your Subaru vehicle’s performance.

Similar Posts