*This post contains affiliate links. That means that if you make a purchase after clicking on a link I may earn a small commission at no extra cost to you. "As an Amazon Associate, I earn from qualifying purchases.” Click here for more Info.

Subaru Hood Latch Diagram

Subaru Hood Latch Diagram

A Subaru hood latch diagram is a visual representation of the various components that make up the hood latch system in a Subaru vehicle. It shows how each component is connected and where they are located in the car. The diagram typically includes labels for each part, such as handle, spring, cable, roller, plunger, and latch assembly.

Additionally, it may have an arrow pointing to show which direction certain parts should be installed or removed from for servicing. A Subaru hood latch diagram can help guide owners and mechanics through basic maintenance or repair tasks related to this piece of hardware.

Subaru Hood Latch Issues

Subaru hood latch issues are a common complaint amongst Subaru owners. The problem is caused by faulty latches that do not securely close the hood, leading to rattling and other noise while driving.

If you suspect your Subaru has a faulty latch, it’s important to have it inspected and replaced as soon as possible – failure to do so may lead to further damage or even an accident if the hood unexpectedly opens while driving.

Subaru Hood Latch Won’t Open

If you have a Subaru and the hood latch won’t open, it could be due to an issue with the release cable. The most common cause is that the latch has become jammed or stuck due to dirt and debris buildup in the mechanism. Another possibility is that one of the bolts which attach the cable to either side of the hood release handle may have come loose or broken off completely.

Subaru Hood Latch Recall

Subaru of America has recalled nearly 855,000 vehicles due to an issue with the hood latch. The recall affects certain model years of Subaru Forester, Outback, and Legacy vehicles manufactured between 2013-2017.

Owners may find that their vehicle’s hood unexpectedly opens while the car is in motion, posing a risk of injury or property damage.

Subaru Hood Latch Recall

Read More About Subaru Outback Eyesight Turned Off By Itself

Subaru Impreza Hood Latch Problem

If you are experiencing a hood latch problem with your Subaru Impreza or Outback, there are several things you can do:

  1. Check the latch mechanism: Check to see if there is any debris or corrosion on the mechanism, and try cleaning it with a soft brush and some lubricant.
  2. Inspect the hood release cable: The hood release cable may have become stretched or broken, preventing it from properly disengaging the latch mechanism. 
  3. Check the hood alignment: If the hood is misaligned, it may not properly engage the latch mechanism. 
  4. Replace the latch mechanism: If the latch mechanism is damaged beyond repair, it may need to be replaced. 

The Subaru Impreza is known for its reliable performance, but some owners have reported an issue with the hood latch failing to securely close. This can be a safety hazard and can also prevent proper airflow over the engine. 

How to Open Hood on Subaru Legacy

Opening the hood on a Subaru Legacy is simple and straightforward. To open it, locate the release lever inside your vehicle, usually located near the driver’s side of the dashboard or in front of your gear shifter. Pull this lever to unlock the hood latch, then go to your engine compartment and locate the secondary hood release handle at either side of your engine bay.

Pull this handle until you hear a clicking sound that indicates that it has been released from its latch. 

Subaru Crosstrek Hood Latch Won’t Open

If you are having issues with your Subaru Crosstrek hood latch not opening, it is likely due to a faulty or broken part. The most common cause of this issue is a worn-out release cable, which can easily be replaced.

Additionally, if the hood latch was recently serviced or replaced, it may need to be adjusted in order for it to function properly.

Subaru Crosstrek Hood Latch Won't Open

Read Also Dodge Ram Headlight Wire Color Codes

Subaru Hood Release Location

The hood release lever for your Subaru vehicle is located on the driver’s side of the engine bay. It can be found just behind the headlight, near the corner where the fender and hood meet. To open it, you’ll need to pull up slightly on the lever before pulling it out towards you.

Once pulled out, you will be able to lift up your hood and access whatever components are necessary for maintenance or repairs.

Subaru Outback Hood Release

The Subaru Outback hood release is located in the lower-left corner of the dashboard near the steering wheel. To open it, first, insert your key into the ignition and turn it to “accessory.” Once this has been done, you then need to pull up on the hood release latch located next to the steering column.

This will allow you to access your engine bay and perform any maintenance or repairs that may be needed.


Where is the Hood Latch on a Subaru?

The hood latch on a Subaru is typically located in the center of the vehicle’s grille, directly below the Subaru logo. The hood latch consists of two parts: a lever and cable that release the hood when pulled. To open your Subaru’s hood, simply grasp the lever with one hand and pull it toward you until you hear a click or feel tension from the cable being released.

What is the Subaru Recall on Hood Latches?

The Subaru recall on hood latches affects certain 2020 models of the Ascent, Legacy, Outback, and BRZ. The issue has to do with the potential for the primary and secondary hood latch systems not to properly secure the hoods due to an improperly machined part in some vehicles.

This could lead to an open or unlatched hood while driving at any speed, increasing the risk of injury from debris entering the vehicle cabin or engine compartment.

In response, Subaru is recalling these affected vehicles and replacing the faulty parts free of charge. Owners should contact their local dealership for more information about how they can have their car serviced if it falls within this recall window.

Where is the Secondary Hood Latch?

The secondary hood latch is located on the underside of the vehicle’s hood. It is a metal lever that acts as an additional safety measure to ensure that the hood stays securely closed when driving. The secondary latch can be found in front of the engine bay, near where the primary hood latch is mounted on most vehicles.

It may also have a cable or rod attached to it, which runs down into the cabin area and needs to be pulled in order for you to open your hood.

What are the Parts of the Car Hood Latch?

The parts of a car hood latch typically include the mounting brackets, release cable, lever arm, and plunger. The mounting brackets are used to secure the latch to the body of the vehicle and must be secured with bolts or other fasteners. The release cable connects from underneath the dashboard to the lever arm on top of the hood latch allowing it to pull down when engaged.

The lever arm then pulls down on a plunger which releases a spring-loaded hook that is connected to an actuator attached to either side of your hood panel. This allows you to open and close your car’s hood without having to use any tools or manually unlatch it each time you need access.

How to Open Subaru Hood Latch 2015 2016 2017 2018 2019 2020 2021 2022


This blog post provided a comprehensive breakdown of the Subaru hood latch diagram, from its components and parts to how it works. It also explained the importance of maintaining this part in order to ensure that your vehicle is safe and running smoothly. 

Similar Posts