*This post contains affiliate links. That means that if you make a purchase after clicking on a link I may earn a small commission at no extra cost to you. "As an Amazon Associate, I earn from qualifying purchases.” Click here for more Info.

Dodge Ram Wheel Speed Sensor Problems

Dodge Ram Wheel Speed Sensor Problems

Dodge Ram wheel speed sensor problems are common and can result in a variety of issues with the vehicle, including engine stalling, poor acceleration, reduced fuel efficiency, erratic shifting, and warning lights. 

The wheel speed sensors are located on each wheel hub assembly and measure the rotational speed of each tire to ensure the proper functioning of the vehicle’s ABS system. When these sensors malfunction or become damaged due to age or debris it could affect the performance of your Dodge Ram.

 One issue that can arise is a faulty wheel speed sensor. A faulty wheel speed sensor can cause problems with your traction control system or anti-lock brakes, resulting in poor handling and reduced braking power.

Dodge Ram Wheel Speed Sensor Problems

Ram 1500 Wheel Speed Sensor Replacement

If your Ram 1500 is showing an ABS light, it may be time to replace the wheel speed sensor. This important safety feature helps prevent skidding and helps keep you safe on the road. Replacing the wheel speed sensor can seem intimidating at first, but with some basic tools and a little knowledge, it’s not too difficult of a job.

First, locate the faulty wheel speed sensor near one of your wheels and disconnect its wiring harness. Then remove any covers or clips that are attached to the sensor before replacing them with a new one. Finally, reconnect all wiring harnesses to complete the installation process!

2012 Ram 1500 Rear Wheel Speed Sensor

The 2012 Ram 1500 was equipped with a rear wheel speed sensor, which was used to measure the rate of rotation of the rear wheels. This information is then relayed to the vehicle’s computer system so that it can adjust the brakes and traction control functions for optimal performance.

The rear wheel speed sensors are generally made from durable materials such as aluminum or stainless steel, ensuring long-term reliability and providing accurate readings even in harsh weather conditions.

Dodge Ram 2500 Abs Sensor Replacement

Replacing the ABS sensor on a Dodge Ram 2500 is an important maintenance task to ensure proper braking performance. The ABS sensor is located in the wheel hub and transmits speed information to the vehicle’s computer. If it fails, your brakes may not respond properly when you press down on the pedal.

Replacing this part requires removing the wheel and then taking off some hardware from behind it before accessing the ABS sensor itself. After replacing it, be sure to double-check that everything is connected correctly and securely for maximum safety while driving.

Dodge Ram 2500 Abs Sensor Replacement

Read More About 2018 Dodge Ram Screen Problems

Dodge ram speed sensor symptoms

A bad speed sensor in a Dodge Ram can cause several issues, including poor performance and transmission problems.

Common symptoms of a faulty speed sensor include the Check Engine Light coming on, incorrect or erratic readings from the speedometer, delayed shifts when changing gears, and an inability to shift out of gear. It may also be difficult to start the vehicle or it may stutter while accelerating.

Additionally, there might be signs of wear on the connecting cables between the transmission and engine. If any of these symptoms occur with your Dodge Ram, it is likely that you need to replace your speed sensor.

The most common symptom of a faulty speed sensor in a Dodge Ram is inaccurate or erratic speedometer readings. If your speedometer jumps around, reads inaccurately, or fails to work altogether, it’s likely that the vehicle’s speed sensor is malfunctioning and needs to be replaced.

Other symptoms may include slipping gears when accelerating from a stop, delayed transmission shifting, and engine stalling when coming to a stop.

How to Test Transmission Speed Sensor

Testing a transmission speed sensor is an important process for ensuring the health of your vehicle’s transmission system. To test it, first, use a digital multimeter to check for voltage coming from the speed sensor. If there is no voltage, then replace the sensor.

Next, connect an oscilloscope to the signal wire and turn on your engine while observing the waveform pattern on the screen; if it doesn’t match up with what you expect, then you may need to replace or adjust the sensor.

Finally, use a scan tool to monitor output data from the ECU (Engine Control Unit) in order to verify that all signals are being sent correctly by checking their frequency and amplitude.

What Happens When a Speed Sensor is Faulty?

When a speed sensor is faulty, it can have serious effects on your vehicle’s performance. In some cases, the engine may not start or run properly. Additionally, if the fault is in the transmission then shifting gears will become difficult and jerky.

The car’s fuel economy may also suffer as well due to incorrect readings from the speed sensor causing the engine to burn more fuel than necessary. Depending on where exactly the fault lies within the system, other issues such as ABS light activation or airbag deployment could occur too.

A faulty speed sensor should be identified and replaced as soon as possible to avoid any further damage being done to your vehicle’s systems.

What Happens When a Speed Sensor is Faulty

Read About Dodge Ram 1500 Service 4Wd Light Reset

How Do You Test a Dodge Speed Sensor?

Testing a Dodge speed sensor is relatively easy and can be done with an OBD-II scanner. First, you need to connect the scanner to the vehicle’s diagnostic port located under the dash. Once connected, turn on your ignition switch and select “Sensor Test” from the OBD-II menu.

Then select “Speed Sensor” from the list of available sensors. The scanner will then display either a numerical value or a graph indicating how much voltage is being sent to the speed sensor.

If it reads 0 volts, then that means there is no signal coming from it, and needs to be replaced immediately; if it reads anything else, then your speed sensor is working properly!

Can You Drive With a Messed Up Speed Sensor?

No, you should not drive with a messed-up speed sensor. This component is important as it helps to control the speed of your vehicle and provides feedback on the revolutions per minute (RPM) of your engine.

If this component is malfunctioning or has been damaged, then it can lead to inaccurate readings which will cause problems when attempting to maintain the correct speed while driving.

Additionally, without a working speed sensor, many modern vehicles may not even be able to start due to an onboard computer that requires accurate information from this device in order for its system to function properly. 

What Happens When the Sensor Goes Out on a Transmission?

When the sensor goes out on a transmission, it can cause several issues. The most common is that the vehicle will not shift properly and may slip in and out of gear. It can also cause hard shifting, an inability to get into reverse, or a check engine light warning that there is an issue with the transmission.

In some cases, it could even lead to more serious damage if left unchecked for too long. In order to prevent further damage from occurring, it’s important to have your vehicle serviced as soon as possible when this type of problem occurs in order to replace or repair any faulty parts in the system and restore proper function.

Rear Wheel Speed Sensor Dodge Ram 1500

The Dodge Ram 1500 is equipped with a rear wheel speed sensor, which monitors and tracks the rotational speed of the vehicle’s rear wheels. This sensor is essential for accurate engine performance, as it ensures that all four wheels are working together to provide maximum power and traction.

The rear wheel speed sensor also helps prevent tire skidding or slipping when cornering or braking hard.

In some cases, a faulty speed sensor can cause your vehicle to perform poorly or experience sudden jerking movements while accelerating. If you suspect that your Dodge Ram 1500 has a faulty rear wheel speed sensor, it’s important to have it checked out by an experienced mechanic as soon as possible.

Rear Wheel Speed Sensor Dodge Ram 1500

Dodge Ram Abs Module Problem

The Dodge Ram is known for being an incredibly reliable vehicle, but some owners may experience problems with their ABS Module. This part helps to regulate the anti-lock brakes on your vehicle, so it’s important that any issues are taken care of quickly. Common signs of a problem include lights flashing on the dashboard and difficulty braking properly.

If you think your Dodge Ram has an ABS Module issue, it’s best to take it in for professional repair as soon as possible.

Dodge Ram 1500 Speed Sensor Location

The speed sensor on the Dodge Ram 1500 is located on the transmission near the rear of the engine. This can easily be accessed by simply removing a few bolts and disconnecting a few wiring connections. Once disconnected, you will need to check the sensors for any signs of damage or corrosion that could affect their functionality.

It is important to replace any faulty components before reinstalling them back in their original location.

2001 Dodge Ram 1500 Abs Sensor Location

The ABS (Anti-lock Braking System) sensor on a 2001 Dodge Ram 1500 is located on the rear axle, just to the right of the brake drum.

This component helps monitor wheel speed and keeps track of any changes in rotational speed. It provides important information to the vehicle’s computer, allowing it to make timely decisions when engaging or disengaging certain parts of its braking system.

2002 Dodge Ram 1500 Abs Sensor Location

The ABS sensor on the 2002 Dodge Ram 1500 can be located in the rear differential housing. This unit is located on the driver’s side of the differential and can be accessed by removing some of the bolts. 

2012 Ram 1500 Rear Wheel Speed Sensor

The 2012 Ram 1500 Rear Wheel Speed Sensor is one of the essential pieces of equipment in a truck’s braking system. The speed sensor detects the rotational speed of the wheels and sends a signal to the brake control module to control the brake pressure and, ultimately, the truck’s stopping power.

What Will A Bad Wheel Speed Sensor Cause

Unfortunately, wheel speed sensors can be prone to damage or failure leading to many potential issues with the motor vehicle. A bad wheel speed sensor can cause several different problems, including decreased vehicle performance, increased risks of a crash in slippery conditions, and a false activation of the ABS.

How Do You Diagnose A Bad Wheel Speed Sensor

1. Check the Voltage

If you suspect that one of your wheel speed sensors is malfunctioning, the first thing to do is to check the voltage. 

2. Look for Corrosion

The next step is to check the sensors for any signs of corrosion. 

3. Check the Electrical Connections

The electrical connections to the wheel speed sensor should also be checked for any signs of corrosion or cut wires. 

4. Test the Sensor

If the physical examination is okay, it’s time to test the sensor for proper readings. 

5. Replace the Sensor

If all of the above tests come back negative, and there is still a suspicion that it could be the wheel speed sensor, it may be necessary to replace it.

Broken Wheel Speed Sensor Symptoms

  1. A warning light related to the ABS. 
  2. Strange noises, such as grinding and humming, coming from the engine or transmission. 
  3. Erratic idle

What Problems Can A Bad Wheel Speed Sensor Cause

Unfortunately, a bad wheel speed sensor can cause a number of problems for a vehicle. The most obvious symptom that a faulty wheel speed sensor is causing a problem is when the ABS light illuminates the dashboard.

Can You Clean A Bad Wheel Speed Sensor?

Yes, cleaning a bad-wheel speed sensor is possible, but it’s important to know what you’re doing. The wheel speed sensor is an important part of a vehicle’s braking system, and it must function properly for the car to do so.

Can You Fix A Wheel Speed Sensor?

Yes, it is possible to repair the wheel speed sensor yourself. However, it is important to remember to use the correct procedure and tools to ensure your and your car’s safety.

Can A Bad Wheel Speed Sensor Cause Loss Of Power?

Yes, a bad wheel speed sensor can cause a loss of power and affect the performance of your car. However, it’s important to keep wheel speed sensors in good condition and check them regularly if you want your vehicle to run efficiently and safely.

What Controls The Wheel Speed Sensor?

Responsible for controlling antilock brakes (ABS) and electronic stability control (ESP), they detect the rotational speed of the vehicle’s wheels to keep them from spinning out of control. Without wheel speed sensors, drivers can easily lose control of their cars in slippery conditions.

Do Wheel Sensors Get Dirty?

The answer is yes. Wheel sensors are exposed to the elements and are vulnerable to mud, dirt, and other debris. This can make them unreliable and can even lead to failure in some cases.

When Should I Replace My Wheel Speed Sensor?

Here are a few signs that you should look out for:

  • Strange Noises: If you hear a grinding or clicking noise when you’re braking, this could be a sign that your wheel speed sensor is activating too late.
  • Brake Failure: If your vehicle’s brakes are failing, it could be a sign that your wheel speed sensor needs to be replaced.
  • ABS Light: If the dashboard ABS light or a warning light comes on, it’s time to check your wheel speed sensor immediately.

Can I Replace Wheel Speed Sensor Myself?

Yes. Replacing a wheel speed sensor can be a straightforward, albeit technical, process that an amateur technician can undertake.

Do Wheel Speed Sensors Need To Be Programmed?

Yes. Wheel speed sensors must be programmed so the system can interpret the information correctly. Programming the wheel speed sensors requires a specific set of instructions, often included in the car’s manual or provided by the manufacturer. 

How a wheel speed sensor works

A wheel speed sensor works in a surprisingly simple way. Inside the wheel is a small component called a Hall Effect Sensor, often with a ring or wheel of magnets. When this magnetic field passes by the semiconductor, it causes a tiny current to flow. This current is fed to the car’s computer, which interprets it as the wheel’s speed.

2018 Ram 2500 Wheel Speed Sensor Location

The wheel speed sensors on the 2018 Ram 2500 are located at each wheel hub. The sensors measure the rotational speed of each wheel and send this information to the anti-lock brake system (ABS) module, which uses it to adjust braking pressure when necessary.

In order for your ABS system to work properly, it’s important that these sensors remain in good condition and free from dirt and debris.

What Happens When Wheel Speed Sensor Fails?

When a wheel speed sensor fails, the ABS system may not be able to properly determine whether or not a vehicle is skidding. This can cause instability in the brakes as well as reduced driver control and safety.

Furthermore, without proper speed readings from the sensors, traction control systems will also be rendered ineffective and unable to help with cornering stability, allowing for excessive tire slip during hard braking or acceleration.

To remedy this issue, an ABS light will usually appear on the dashboard and require the replacement of the faulty wheel speed sensor before any further driving should occur.

What are the Symptoms of a Failing Speed Sensor?

The most common symptom of a failing speed sensor is inaccurate vehicle speed readings. This can cause the speedometer to jump erratically or not reflect the actual speed that you are driving at all. Other symptoms include engine stalling, poor fuel economy, transmission shifting issues, and an illuminated check engine light on your dashboard.

If you experience any of these signs, it’s recommended that you have your car inspected by a qualified mechanic as soon as possible in order to avoid further damage to your vehicle’s systems.

What are the Symptoms of a Failing Speed Sensor

Read More About Dodge Ram Gear Selector On Steering Wheel

How Do You Test a Dodge Speed Sensor?

In order to test a Dodge speed sensor, you must first determine if the speedometer is operating correctly. If it is not, then check the wiring and connections of the speed sensor for any loose or corroded wires.

Once all wiring and connections have been checked, connect a digital multimeter set to AC volts mode to the two terminals on either side of the speed sensor.

Start your engine and allow it to idle for about five minutes before revving it up slowly until you reach 2000 RPMs. The voltage output should increase as your engine revs higher and testing with this method can help identify any issues with your Dodge speed sensor.

Can I Drive With a Broken Wheel Speed Sensor?

No, you should not drive with a broken wheel speed sensor. The wheel speed sensor is an important component of the vehicle’s Anti-lock Brake System (ABS). This system monitors and controls your wheels’ rotational speed to help prevent skidding or locking up during braking.

A malfunctioning wheel speed sensor can cause your brakes to lock up more easily, leading to a dangerous loss of control in emergency situations. Additionally, it could lead to false readings from the ABS computer which might prompt other problems such as uneven braking power distribution among all four wheels.

Overall, it is best to have your wheel speed sensors replaced by a certified technician as soon as possible for optimal safety on the road.

How To Replace ABS Sensor On Your Ram (Wheel Speed Sensor) 1500 2500 3500


In conclusion, the Dodge Ram wheel speed sensor is a vital component of the vehicle and should be regularly checked for proper function.

Although it can cause many issues if malfunctioning, these problems are usually easily identifiable and repairable. With regular maintenance and timely repairs, your vehicle should remain in top condition.

Similar Posts